An ATC Epoxy Guide
You poured your blood, sweat, and tears (not to mention money) into that gorgeous epoxy flooring, countertop, or tabletop, so you want to keep it looking as shiny and slick as the day it was installed. Epoxy surfaces are durable, but they still need a little TLC to maintain that mirror-like sheen and prevent staining. The good news is, with a few easy tips, you can keep your epoxy surface gleaming for years to come. For more information visit – atcepoxy.com.
Clean Regularly With Mild Soap and Water
To keep your epoxy surface gleaming, give it a quick wipe down with a damp cloth and mild detergent once a week or so. Be sure to blot dry to prevent water spots. For stuck-on messes, scrub gently with an abrasive sponge or scrubber.
Avoid harsh chemicals, abrasive cleaners, and strong solvents like lacquer thinner or acetone which can damage the epoxy. Also skip automatic dish soaps which often contain wax or oils. Stick with pH neutral products free from dyes and fragrances.
For the inevitable scratches or stains, try buffing them out first with fine-grit sandpaper (400+ grit) or steel wool. If that doesn’t work, you can try a commercial epoxy scratch remover/touch up product, but test in an inconspicuous area first.
Keeping your epoxy surface clean and polished is really quite simple if you establish a regular routine. A little elbow grease and the right mild products are all you need to keep your floor, countertop or other epoxy surface shining like new for years to come.
Reapply a Topcoat Sealant Annually
To keep your epoxy surface shining like new, follow these easy tips:
– Use a soft cloth or sponge with warm water and mild detergent to clean epoxy surfaces. This prevents dirt and debris buildup. Gently wipe the surface with circular motions, then rinse well with water and dry with a microfiber cloth to prevent water spots.
– For stuck-on messes, make a paste from baking soda and water and gently scrub off with an abrasive sponge or scrubber. Rinse and dry as before.
– Avoid harsh chemicals, abrasive cleaners and strong solvents like lacquer thinner or acetone which can damage the epoxy.
– Buff out light scratches and marks with a fine grade (600+) of wet/dry sandpaper, followed by a polishing compound and buffing pad.
– Re-seal epoxy surfaces every 6-12 months to protect the shine and prevent stains. Wipe on 2-3 coats of epoxy sealant, waiting 30 minutes between coats.
– Place protective pads under furniture to avoid scratches.
With regular maintenance and care, your epoxy surface will keep its mirror finish and last for years to come.
– Reapplying a Topcoat Like Pentra-Sil® 244+ From ATC Epoxy Helps Maintain the Protective Barrier and Shine.
To keep your epoxy surface shining like new, it’s important to reapply a topcoat sealant annually.
Every 12 months or so, clean your epoxy floor thoroughly. Then, apply 2-3 coats of a high-quality epoxy topcoat sealant, waiting for each coat to dry as directed. Topcoat sealants, also called epoxy topical sealers, protect the surface while enhancing gloss and durability.
Reapplying a topcoat regularly helps prevent dulling and scratches, shields against stains, and extends the life of your epoxy flooring. For the best results, choose a topcoat from the same manufacturer as your epoxy flooring system. Their products are designed to work together harmoniously.
With annual topcoat touch-ups and proper care like sweeping, mopping, and wiping up spills quickly, an epoxy floor can stay shiny and new-looking for many years. Keeping on top of maintenance from the start will save you time and money in the long run.
Avoid Harsh Chemicals That Can Damage the Epoxy
To keep your epoxy flooring looking shiny and new, reapplying a topcoat sealer is key. Topcoats like Pentra-Sil® 244+ from ATC Epoxy create a protective barrier over the epoxy and enhance the gloss. Over time, the topcoat can start to wear down from traffic and cleaning, allowing the epoxy below to become dull.
Reapplying Pentra-Sil® 244+
About once a year, you’ll want to reapply a coat of Pentra-Sil® 244+ topcoat sealer to your epoxy flooring. Lightly sand the floor with fine-grit sandpaper to rough up the surface. Vacuum and wipe away dust. Then, roll on one or two coats of Pentra-Sil® 244+, waiting 2-3 hours between coats. The topcoat dries quickly, allowing you to walk on the floor in just 4-6 hours. Your epoxy floor will look shiny and new again in no time.
Reapplying a topcoat like Pentra-Sil® 244+ helps maintain the protective barrier, shine, and durability of your epoxy flooring. Be sure to keep traffic light for the first day and avoid any chemicals like paint thinners that could damage the new topcoat. Following the recommended reapplication schedule and proper care guidelines will keep your epoxy floor gleaming for years to come.
Avoid using harsh chemicals, abrasive cleaners, and strong solvents on your epoxy surface. These can dull the shine and potentially damage the epoxy. Stick with pH neutral cleaners specifically for epoxy floors and countertops.
For spot stains, use an epoxy-safe degreaser or rubbing alcohol. Gently blot until the stain lifts, then rinse well with water and dry. Avoid scrubbing too hard, which can scratch the surface.
Isopropyl alcohol, acetone and lacquer thinner should only be used sparingly and for tough stains. Always do a test in an inconspicuous area first to check for discoloration. Rinse and dry the area thoroughly when done to prevent damage.
For stuck-on messes, let the epoxy cleaner or degreaser sit on the spot for several minutes so it can fully penetrate before wiping clean. Use a plastic scraper or putty knife to gently pry off any remaining debris.
With regular care and maintenance, and by avoiding the use of harsh chemicals, your epoxy flooring or countertops will stay glossy and shining like new for years to come.
Sharon Howe is a creative person with diverse talents. She writes engaging articles for WonderWorldSpace.com, where she works as a content writer. Writing allows Sharon to inform and captivate readers. Additionally, Sharon pursues music as a hobby, which allows her to showcase her artistic abilities in another creative area.